Subaru Legacy 2004 Service Manual page 529

Hide thumbs Also See for Legacy 2004:
Table of Contents

Advertisement

Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
1
CHECK CURRENT DATA.
1) Start the engine.
2) Read the data of engine coolant tempera-
ture sensor signal using Subaru Select Moni-
tor.
NOTE:
For detailed operation procedure, refer to
"READ CURRENT DATA FOR ENGINE". <Ref.
to EN(H4SO 2.0)(diag)-25, Subaru Select Mon-
itor.>
2
CHECK HARNESS BETWEEN ENGINE
COOLANT TEMPERATURE SENSOR AND
ECM CONNECTOR.
1) Turn the ignition switch to OFF.
2) Disconnect the connectors from engine
coolant temperature sensor.
3) Measure the voltage between engine cool-
ant temperature sensor connector and engine
ground.
Connector & terminal
(E8) No. 2 (+) — Engine ground (
3
CHECK HARNESS BETWEEN ENGINE
COOLANT TEMPERATURE SENSOR AND
ECM CONNECTOR.
1) Turn the ignition switch to ON.
2) Measure the voltage between engine cool-
ant temperature sensor connector and engine
ground.
Connector & terminal
(E8) No. 2 (+) — Engine ground (
4
CHECK HARNESS BETWEEN ENGINE
COOLANT TEMPERATURE SENSOR AND
ECM CONNECTOR.
Measure the voltage between engine coolant
temperature sensor connector and engine
ground.
Connector & terminal
(E8) No. 2 (+) — Engine ground (
Check
Is the engine coolant tempera-
ture less than "40!C ("40!F)?
Is the voltage more than 10 V? Repair the battery
"
):
Is the voltage more than 10 V? Repair the battery
"
):
Is the voltage more than 4 V?
"
):
EN(H4SO 2.0)(diag)-97
ENGINE (DIAGNOSTICS)
Yes
Go to step 2.
Repair the poor
contact.
NOTE:
In this case, repair
the following:
• Poor contact in
engine coolant
temperature sen-
sor
• Poor contact in
ECM
• Poor contact in
coupling connector
• Poor contact in
joint connector
Go to step 3.
short circuit in har-
ness between
ECM and engine
coolant tempera-
ture sensor con-
nector.
Go to step 4.
short circuit in har-
ness between
ECM and engine
coolant tempera-
ture sensor con-
nector.
Go to step 5.
Repair the har-
ness and connec-
tor.
NOTE:
In this case, repair
the following:
• Open circuit in
harness between
ECM and engine
coolant tempera-
ture sensor con-
nector
• Poor contact in
engine coolant
temperature sen-
sor connector
• Poor contact in
ECM connector
• Poor contact in
coupling connector
• Poor contact in
joint connector
No

Advertisement

Table of Contents
loading

Table of Contents