FUEL INJECTION (FUEL SYSTEMS)
6. Camshaft Position Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from the camshaft po-
sition sensor.
3) Remove the bolt which installs camshaft position
sensor to the camshaft position sensor support.
4) Remove the bolt which installs camshaft position
sensor support to the camshaft cap LH.
CAMSHAFT POSITION SENSOR
FU-00009
FU-00147
FU-00177
FU-00178
FU(H4SO)-28
5) Remove the camshaft position sensor and cam-
shaft position sensor support as a unit.
6) Remove the camshaft position sensor itself.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
• Camshaft position sensor support;
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
• Camshaft position sensor;
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
FU-00179