Timing Belt - Subaru Legacy 2004 Service Manual

PERIODIC MAINTENANCE SERVICES

7. Timing Belt

A: REPLACEMENT
1. SOHC MODEL
1) Protect the radiator with cardboard and blanket.
2) Remove the V-belt covers.
3) Remove the V-belts. <Ref. to ME(H4SO 2.0)-38,
V-belt.>
4) Remove the A/C compressor V-belt tensioner.
5) Use the ST to lock the crankshaft, and remove
the pulley bolt.
ST 499977100 CRANK PULLEY WRENCH
6) Remove the crank pulley.
7) Remove the belt cover (LH).
8) Remove the front timing belt cover.
9) Remove the timing belt guide. (MT model)
10) Turn the crankshaft and align the alignment
marks on crankshaft, and left and right cam sprock-
ets with notches of belt cover and cylinder block.
Timing Belt
PM-00003
ST
PM-00007
PM-14
ST 499987500 CRANKSHAFT SOCKET
(B)
(A) Notch
(B) Alignment mark
11) Remove the belt idler.
12) Remove the belt idler (No. 2).
13) Remove the timing belt.
14) Remove the automatic belt tension adjuster as-
sembly.
15) Install in the reverse order of removal. <Ref. to
ME(H4SO 2.0)-44, INSTALLATION, Timing Belt.>
(B)
(A)
(B)
PM-00009
PM-00010
PM-00011