Subaru Legacy 2004 Service Manual page 284

MECHANICAL
CAUTION:
• Do not remove the oil seal unless necessary.
• Do not scratch the journal surface when re-
moving the oil seal.
B: INSTALLATION
1) Apply a coat of engine oil to camshaft journals
and install the camshaft.
2) Install the camshaft cap.
(1) Apply liquid gasket to the mating surfaces of
camshaft cap.
Liquid gasket:
THREE BOND 1280B (Part No. K0877YA018)
NOTE:
• Apply a coat of liquid gasket of 3 mm (0.12 in) in
diameter (A) along the edge (B) of camshaft cap
(C) mating surface.
• Assemble them within 20 min. after applying liq-
uid gasket.
(A)
(B)
(2) Temporarily tighten the bolts (g) through (j)
in alphabetical sequence.
( i )
( j )
Camshaft
ME-00264
(C)
ME-00265
( g )
( h )
ME-00266
ME(H4SO 2.0)-54
(3) Install the valve rocker assembly.
(4) Tighten the bolts (a) through (h) in alphabet-
ical sequence.
Tightening torque:
!
25 N m (2.5 kgf-m, 18.1 ft-lb)
( g ) ( a )
( f )
( d )
(5) Tighten the TORX
phabetical sequence using ST.
ST 499497000 TORX
Tightening torque:
!
18 N m (1.8 kgf-m, 13.0 ft-lb)
( k )
( n )
( j )
(6) Tighten the bolts (o) through (v) in alphabet-
ical sequence.
ME-00267
( c )
( e )
( h )
( b )
ME-00268
®
bolts (i) through (n) in al-
®
PLUS
( i ) ( m )
( l )
ME-00269