Subaru Legacy 2004 Service Manual page 288

MECHANICAL
7) Install the cam sprocket. <Ref. to ME(H4SO
2.0)-48, INSTALLATION, Cam Sprocket.>
8) Install the timing belt. <Ref. to ME(H4SO 2.0)-
44, INSTALLATION, Timing Belt.>
9) Install the timing belt cover.
<Ref. to ME(H4SO 2.0)-42, INSTALLATION, Tim-
ing Belt Cover.>
10) Install the crank pulley. <Ref. to ME(H4SO
2.0)-40, INSTALLATION, Crank Pulley.>
11) Install the V-belts. <Ref. to ME(H4SO 2.0)-38,
INSTALLATION, V-belt.>
C: DISASSEMBLY
1) Place the cylinder head on the ST.
ST 498267800 CYLINDER HEAD TABLE
2) Set the ST on valve spring. Compress the valve
spring and remove the valve spring retainer key.
Remove each valve and valve spring.
ST 499718000 VALVE SPRING REMOVER
D: ASSEMBLY
(1) Valve
(2) Valve guide
(3) Valve spring seat
(4) Oil seal
(5) Valve springs
Cylinder Head
(1)
(2)
(9)
(10)
(6) Retainer
(7) Retainer key
(8) Spark plug gasket
(9) Camshaft
(10) Oil seal
ME(H4SO 2.0)-58
NOTE:
Keep all the removed parts in order for re-installing
in their original positions.
CAUTION:
• Mark each valve to prevent confusion.
• Use extreme care not to damage the lips of
the intake valve oil seals and exhaust valve oil
seals.
ST
(8)
(3)
(5)
(7)
(11)
(4)
(6)
(11)
(12)
(13)
ME-00280
(12)
ME-00281
Plug
Camshaft cap
Valve rocker ASSY
(13)