Transmission Gear Oil - Subaru Legacy 2004 Service Manual

13.Transmission Gear Oil

A: REPLACEMENT
1. MANUAL TRANSMISSION
1) Drain the gear oil by removing drain plug.
NOTE:
• Before starting work, cool off the transmission
gear oil well.
• If transmission gear oil adheres to the exhaust
pipe, wipe it off completely.
2) Replace the gasket with new one, and then tight-
en the drain plug to specified torque.
Tightening torque:
!
69 N m (7.0 kgf-m, 50.6 ft-lb)
3) Fill the transmission gear oil through the oil level
gauge hole up to the upper point of level gauge.
Recommended gear oil:
Refer to "RM" section. <Ref. to RM-3, LUBRI-
CANTS, RECOMMENDED MATERIALS, Rec-
ommended Materials.>
NOTE:
Each oil manufacturer has its base oil and addi-
tives. Thus, do not mix two or more brands.
Gear oil capacity:
3.5 2 (3.7 US qt, 3.1 Imp qt)
(A)
(A) Oil level gauge
(B) Upper level
(C) Lower level
Transmission Gear Oil
PM-00166
(B)
(C)
PM-00030
PM-25
PERIODIC MAINTENANCE SERVICES