Subaru Legacy 2004 Service Manual page 715

30.Fuel Delivery, Return and Evaporation Lines
A: REMOVAL
1) Set the vehicle on a lift.
2) Release the fuel pressure. <Ref. to FU(H4SO 2.5)-40, RELEASING OF FUEL PRESSURE, PROCE-
DURE, Fuel.>
3) Open the fuel filler flap lid, and remove the fuel filler cap.
4) Remove the floor mat. <Ref. to EI-73, REMOVAL, Floor Mat.>
5) Disconnect the fuel delivery pipes and hoses, and then disconnect the fuel return pipes and hoses, evap-
oration pipes and hoses.
6) In the engine compartment, disconnect the fuel
delivery hoses, return hoses, and evaporation
hose.
(C)
(A) Fuel delivery hose
(B) Return hose
(C) Evaporation hose
7) Lift-up the vehicle.
Fuel Delivery, Return and Evaporation Lines
(A)
(B)
FU-01088
FU(H4SO 2.5)-55
FUEL INJECTION (FUEL SYSTEMS)
8) Remove the fuel tank. <Ref. to FU(H4SO 2.5)-
41, REMOVAL, Fuel Tank.>
9) Separate the quick connector on fuel line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) To prevent from damaging or entering for-
eign matter, wrap the pipes and connectors with
plastic bag, etc.
FU-01148
FU-01333