Subaru Legacy 2004 Service Manual page 679

17) Install the fuel pipe protector RH.
Tightening torque:
!
19 N m (1.9 kgf-m, 13.7 ft-lb)
18) Install the fuel pipe protector LH.
Tightening torque:
!
19 N m (1.9 kgf-m, 13.7 ft-lb)
19) Connect the pressure regulator vacuum hose
(A) to intake manifold.
20) Install the PCV pipe. (EC, EK and K4 model)
Intake Manifold
FU-01094
FU-01093
(A)
FU-01092
FU-01091
FU(H4SO 2.5)-19
FUEL INJECTION (FUEL SYSTEMS)
21) Install the EGR valve. (EC, EK and K4 model)
<Ref. to FU(H4SO 2.5)-30, INSTALLATION, EGR
Valve.>
22) Install the throttle body to intake manifold.
<Ref. to FU(H4SO 2.5)-11, INSTALLATION,
Throttle Body.>
23) Install the ignition coil & ignitor ASSY. <Ref. to
IG(H4SO 2.0)-8, INSTALLATION, Ignition Coil &
Ignitor ASSY.>
24) Install the engine ground terminal to intake
manifold.
Tightening torque:
!
19 N m (1.9 kgf-m, 13.7 ft-lb)
E: INSPECTION
Make sure the fuel pipe and fuel hoses are not
damaged and the connections are tightened firmly.
FU-01090