Subaru Legacy 2004 Service Manual page 163

FUEL INJECTION (FUEL SYSTEMS)
9) Secure the engine harness with harness band
(A) and bolts (B), (C).
Tightening torque:
!
(B): 16 N m (1.6 kgf-m, 11.8 ft-lb)
!
(C): 6.4 N m (0.65 kgf-m, 4.7 ft-lb)
(A)
10) Install the purge control solenoid valve. <Ref.
to EC(H4SO 2.0)-7, INSTALLATION, Purge Con-
trol Solenoid Valve.>
11) Connect the connectors to fuel injector.
Intake Manifold
(B)
(A)
(A)
FU-02068
(C)
FU-02069
FU-02067
FU(H4SO 2.0)-18
12) Install the fuel pipe protector RH.
Tightening torque:
!
19 N m (1.9 kgf-m, 13.7 ft-lb)
13) Install the fuel pipe protector LH.
Tightening torque:
!
19 N m (1.9 kgf-m, 13.7 ft-lb)
14) Connect the pressure regulator vacuum hose
to intake manifold.
15) Install the EGR valve. (EC, EK, K4 model)
<Ref. to FU(H4SO 2.0)-28, INSTALLATION, EGR
Valve.>
16) Install the throttle body to intake manifold.
<Ref. to FU(H4SO 2.0)-10, INSTALLATION, Throt-
tle Body.>
17) Install the ignition coil & ignitor ASSY. <Ref. to
IG(H4SO 2.0)-8, INSTALLATION, Ignition Coil &
Ignitor ASSY.>
18) Install the engine ground terminal to intake
manifold.
FU-02066
FU-02065
FU-02064