Air Cleaner Element - Subaru Legacy 2004 Service Manual

2. Air Cleaner Element

A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from mass air flow and
intake air temperature sensor. (2.5 L EC, EK, K4
model)
3) Remove the clip (A) from upper side of air clean-
er case.
(A)
4) Pull the air cleaner case (rear) to rearward of the
vehicle, and then remove the air cleaner element.
NOTE:
Be careful that the power steering hose is secured
to the under side of air cleaner case (rear).
Air Cleaner Element
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Fasten the air cleaner case (rear) with a clip after
inserting the lower tab of the case.
IN-00203
C: INSPECTION
Replace if excessively damaged or dirty.
IN-00204
IN-00254
IN(H4SO 2.0)-5
INTAKE (INDUCTION)
IN-00207