Fuel Delivery, Return And Evaporation Lines - Subaru Legacy 2004 Service Manual

27.Fuel Delivery, Return and Evaporation Lines

A: REMOVAL
1) Set the vehicle on a lift.
2) Release the fuel pressure. <Ref. to FU(H4SO 2.0)-38, RELEASING OF FUEL PRESSURE, PROCE-
DURE, Fuel.>
3) Open the fuel filler flap lid, and remove the fuel filler cap.
4) Remove the floor mat. <Ref. to EI-73, REMOVAL, Floor Mat.>
5) Disconnect the fuel delivery pipes and hoses, and then disconnect the fuel return pipes and hoses, evap-
oration pipes and hoses.
6) In the engine compartment, disconnect the fuel
delivery hoses, return hoses and evaporation hose.
(A) Fuel delivery hose
(B) Return hose
(C) Evaporation hose
7) Lift-up the vehicle.
8) Remove the fuel tank. <Ref. to FU(H4SO 2.0)-
39, REMOVAL, Fuel Tank.>
Fuel Delivery, Return and Evaporation Lines
(A)
(C)
(B)
FU-02062
FU(H4SO 2.0)-53
FUEL INJECTION (FUEL SYSTEMS)
9) Separate the quick connector on fuel line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) To prevent from damaging or entering for-
eign matter, wrap the pipes and connectors with
plastic bag, etc.
(3) Hold the connector (A) and push retainer (B)
down.
(4) Pull out the connector (A) from retainer (B).
FU-01148
FU-01333