Subaru Legacy 2004 Service Manual page 294

MECHANICAL
19) Remove the water pump after loosening the
bolts in alphabetical sequence as shown in the fig-
ure.
(E)
(D)
(C)
20) Remove the oil pump from cylinder block.
Use a flat tip screwdriver as shown in the figure
when removing the oil pump.
CAUTION:
Be careful not to scratch the mating surface of
cylinder block and oil pump.
21) Remove the oil pan.
(1) Place the cylinder block to face the #2 and
#4 piston side upward.
(2) Remove the bolts which secure oil pan to
cylinder block.
(3) Insert a oil pan cutter blade between cylin-
der block-to-oil pan clearance and remove the
oil pan.
NOTE:
Do not use a screwdriver or similar tools in place of
oil pan cutter.
22) Remove the oil strainer stay.
23) Remove the oil strainer.
24) Remove the baffle plate.
Cylinder Block
(F)
(A)
(B)
ME-00847
ME-00138
ME(H4SO 2.0)-64
25) Remove the oil filter.
26) Remove the water pipe.
ME-00299
ME-00300