Subaru Legacy 2004 Service Manual page 418

STARTING/CHARGING SYSTEMS
8) Install the yoke to front bracket matching front
bracket to the groove of yoke assembly.
9) Install the brush holder to yoke assembly as fol-
lows.
(1) Press the brush down into brush holder, and
then fix the brush in that position using an appro-
priate tool (such as a fit socket wrench).
(2) Match the brush holder to groove of yoke,
and then slide the brush holder into yoke assem-
bly to install.
Starter
10) Install the rear cover matching it's groove to
brush holder assembly.
SC-00072
11) Install rear cover set.
SC-00073
12) Install the switch assembly to front bracket as
follows.
(1) Insert the plunger and plunger spring into
switch assembly.
(2) Hook the plunger protrusion on lever edge
to install plunger to front bracket.
SC-00074
SC(H4SO 2.0)-10
(A) Brush holder ASSY
(B) Rear cover
(A) Rear cover set
(A)
(A) Switch ASSY
(A)
(B)
SC-00062
(A)
SC-00061
SC-00060