Subaru Legacy 2004 Service Manual page 675

15) Install the air cleaner case and air intake cham-
ber. <Ref. to IN(H4SO 2.0)-7, INSTALLATION, Air
Cleaner Case.> <Ref. to IN(H4SO 2.0)-8, INSTAL-
LATION, Air Intake Chamber.>
16) Install the fuse of fuel pump to main fuse box.
17) Connect the battery ground cable to battery.
C: DISASSEMBLY
1) Disconnect the engine ground terminal from in-
take manifold.
2) Remove the ignition coil & ignitor ASSY. <Ref. to
IG(H4SO 2.0)-8, REMOVAL, Ignition Coil & Ignitor
ASSY.>
3) Remove the throttle body. <Ref. to FU(H4SO
2.5)-11, REMOVAL, Throttle Body.>
4) Remove the EGR valve. (EC, EK and K4 model)
<Ref. to FU(H4SO 2.5)-30, REMOVAL, EGR
Valve.>
5) Remove the PCV pipe. (EC, EK and K4 model)
Intake Manifold
6) Disconnect the pressure regulator vacuum hose
(A) from intake manifold.
7) Remove the fuel pipe protector LH.
IN-00203
8) Remove the fuel pipe protector RH.
FU-01090
9) Disconnect the connectors (A) from fuel injector.
10) Remove the harness band (B) which holds en-
gine harness to injector pipe.
FU-01091
11) Remove the tumble generator valve actuator.
(EC, EK and K4 model) <Ref. to FU(H4SO 2.5)-29,
REMOVAL, Tumble Generator Valve Actuator.>
FU(H4SO 2.5)-15
FUEL INJECTION (FUEL SYSTEMS)
(A)
(B)
(A)
FU-01092
FU-01093
FU-01094
FU-01336