General Description - Subaru Legacy 2004 Service Manual

STARTING/CHARGING SYSTEMS

1. General Description

A: SPECIFICATION
Item
Vehicle model
Type
Model
Manufacturer
Voltage and output
Revolving direction
Number of pinion teeth
No-load charac-
teristics
Starter
Load character-
istics
Lock character-
istics
Model
Model
Manufacturer
Voltage and output
Polarity on ground side
Generator
Revolving direction
Armature connection
Output current
Regulated voltage
Type and capac-
Battery
ity
General Description
Voltage
Current
Rotating speed
Voltage
Current
8.84 N!m (0.90 kgf-m, 6.5 ft-lb) or
Torque
Rotating speed
Voltage
Current
17 N!m (1.73 kgf-m, 12.5 ft-lb) or
Torque
Rotating-field three-phase type, voltage regulator built-in type, with load
EC, EK, K4
12 V — 48 AH (55D23L)
model
KS, KA model
SC(H4SO 2.0)-2
Specification
MT
Reduction type
M000T30471
Mitsubishi Electric
12 V — 1.0 kW
Counterclockwise (when observed from pinion)
8
11 V
95 A or less
2,500 rpm or more
7.5 V
300 A
more
870 rpm or more
4 V
680 A or less
more
response control system
A3TG0491
Mitsubishi Electric
12 V — 110 A
Negative
Clockwise (when observed from pulley side)
3-phase Y-type
1,500 rpm — 50 A or more
2,500 rpm — 91 A or more
5,000 rpm — 105 A or more
14.1 — 14.8 V [20"C (68"F)]
12 V — 27 AH (34B19L)
12 V — 48 AH (55D23L)
AT
M000T20171
12 V — 1.4 kW
9
90 A or less
2,000 rpm or more
7.7 V
400 A
16.7 N!m (1.70 kgf-m, 12.3 ft-lb) or
more
710 rpm or more
3.5 V
960 A or less
31 N!m (3.16 kgf-m, 22.9 ft-lb) or
more
12 V — 52 AH (65D23L)
12 V — 52 AH (75D23L)