Subaru Legacy 2004 Service Manual page 716

FUEL INJECTION (FUEL SYSTEMS)
(3) Hold the connector (A) and push retainer (B)
down.
(4) Pull out the connector (A) from retainer (B).
CAUTION:
Always use a new retainer.
( A )
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel line.
CAUTION:
• Always use a new retainer.
• Make sure that the connected portion is not
damaged or dust-covered. If necessary, clean
the seal surface of pipe.
(A) Seal surface
(B) Pipe
(1) Set the new retainer (B) to connector (A).
Fuel Delivery, Return and Evaporation Lines
( B )
( C )
FU-00124
( A )
( B )
FU-00125
FU(H4SO 2.5)-56
(2) Push the pipe into the connector completely.
( A )
(A) Connector
(B) Retainer
(C) Pipe
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Ensure the two retainer pawls are engaged in
their mating positions in the connector.
• Be sure to inspect the hoses and their con-
nections for fuel leakage.
( A )
(A) Connector
(B) Retainer
(C) Pipe
2) Connect the fuel delivery hose to the pipe with
an overlap of 20 to 25 mm (0.79 to 0.98 in).
Type A: When the amount to be inserted is speci-
fied.
Type B: When the amount to be inserted is not
specified.
( B )
( C )
FU-00126
( B )
( C )
FU-00127