Subaru Legacy 2004 Service Manual page 259

MECHANICAL
(4) Remove other bolts while rotating the en-
gine using a socket wrench.
19) Remove the pitching stopper.
20) Disconnect the fuel delivery hose (A), return
hose (B) and evaporation hose (C).
CAUTION:
• Catch fuel from the hose into container.
• Disconnect the hose with its end wrapped
with cloth to prevent fuel from splashing.
(C)
21) Support the engine with a lifting device and
wire ropes.
Engine Assembly
ME-00212
ME-00213
(A)
(B)
FU-01088
LU-00222
ME(H4SO 2.0)-32
22) Support the transmission with a garage jack.
CAUTION:
• Doing this is very important because the
transmission lowers for its own weight. This
work is also of great importance for facilitating
reinstallation.
(A) Transmission
(B) Garage jack
• Before removing the engine away from trans-
mission, check to be sure no work has been
overlooked.
23) Separation of engine and transmission.
(1) Remove the starter. <Ref. to SC(H4SO 2.0)-
6, REMOVAL, Starter.>
(2) Remove the bolts which hold upper side of
transmission to engine.
24) Set the ST to converter case. (AT model)
ST 498277200 STOPPER SET
25) Remove the engine from vehicle.
(1) Slightly raise the engine.
(2) Raise the transmission with garage jack.
(A)
(B)
ME-00215
ME-00216
ST
ME-00217