Subaru Legacy 2004 Service Manual page 116

2. DOHC MODEL
1) Protect the radiator with cardboard and blanket.
2) Remove the V-belts. <Ref. to ME(H4DOTC)-39,
V-belt.>
3) Remove the A/C compressor V-belt tensioner.
4) Remove the pulley bolt. Use the ST to lock
crankshaft.
• Except for turbo MT model:
ST 499977400 CRANK PULLEY WRENCH
• Turbo MT model:
ST 499977100 CRANK PULLEY WRENCH
ST
5) Remove the crank pulley.
6) Remove the belt cover (LH).
7) Remove the belt cover (RH).
8) Remove the front belt cover.
Timing Belt
9) Remove the timing belt guide. (Except for non-
turbo AT model)
PM-00093
10) Turn the crankshaft and align the alignment
marks on crankshaft, and left and right cam sprock-
ets with notches of belt cover and cylinder block.
Use the ST to turn crankshaft.
PM-15
PERIODIC MAINTENANCE SERVICES
PM-00008
ME-00727
ME-00728
ME-00729