Muffler - Subaru Legacy 2004 Service Manual

Hide thumbs Also See for Legacy 2004:

Table of Contents

5. Muffler

1) Separate the muffler from rear exhaust pipe.

• RH side (2.5 L model)

2) Apply a coat of spray type lubricant to mating

area of cushion rubber.

• RH side (2.5 L model)

3) Remove the front and rear cushion rubber, and

then remove the muffler.

B: INSTALLATION

Install in the reverse order of removal.

Use a new gasket and self-locking nut.

Tightening torque:

• RH side (2.5 L model)

C: INSPECTION

1) Make sure there are no exhaust leaks from con-

nections and welds.

2) Make sure there are no holes or rusting.

3) Make sure the cushion rubber is not worn or

EX(H4SO 2.0)-13

m (4.9 kgf-m, 35.4 ft-lb)

Table of Contents