Subaru Legacy 2004 Service Manual page 383

17) Remove the baffle plate.
(D)
(C)
(B)
(A)
(A) Oil pan
(B) Oil strainer
(C) Baffle plate
(D) Cylinder block
B: INSTALLATION
CAUTION:
Before installing the oil pan, clean the mating
surface of oil pan and cylinder block.
1) Install the baffle plate.
Tightening torque:
#
6.4 N m (0.65 kgf-m, 4.7 ft-lb)
2) Install the oil strainer onto baffle plate.
NOTE:
Replace O-ring with new one.
Tightening torque:
#
10 N m (1.0 kgf-m, 7.2 ft-lb)
Oil Pan and Strainer
3) Apply liquid gasket to the mating surfaces and
install the oil pan.
Liquid gasket:
THREE BOND 1207C (Part No. 004403012) or
equivalent
4) Tighten the bolts which install oil pan onto cylin-
der block.
Tightening torque:
5 N
LU-00189
5) Lower the engine onto front crossmember.
LU(H4SO 2.0)-15
#
m (0.5 kgf-m, 3.6 ft-lb)
(D)
(C)
(B)
(A)
(A) Oil pan
(B) Oil strainer
(C) Baffle plate
(D) Cylinder block
LUBRICATION
LU-00034
LU-00189