Throttle Body - Subaru Legacy 2004 Service Manual

2. Throttle Body

A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the air intake chamber. <Ref. to
IN(H4SO 2.0)-8, REMOVAL, Air Intake Chamber.>
3) Disconnect the connectors from the throttle posi-
tion sensor and manifold absolute pressure sensor.
(B)
(A) Throttle position sensor
(B) Manifold absolute pressure sensor
4) Disconnect the engine coolant hoses (A) from
throttle body.
5) Remove the bolts (B) which secure throttle body
to intake manifold.
(A)
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
!
8 N m (0.8 kgf-m, 5.8 ft-lb)
Throttle Body
IN-00203
(A)
FU-01083
(B)
(B)
(A)
FU-01084
FU(H4SO 2.5)-11
FUEL INJECTION (FUEL SYSTEMS)