Subaru Legacy 2004 Service Manual page 703

(3) Remove the bolts which secure the rear
suspension assembly to body.
(4) Remove the rear suspension assembly.
21) Disconnect the two-way valve hose (A) from
two-way valve, and then remove the two-way valve
from bracket.
(A)
22) Loosen the clamp and disconnect the fuel filler
hose (A) and vent hose (B) from fuel filler pipe.
(A)
Fuel Tank
FU-01133
FU-01134
FU-01135
(B)
FU-01136
FU(H4SO 2.5)-43
FUEL INJECTION (FUEL SYSTEMS)
23) Support the fuel tank with transmission jack, re-
move the bolts from fuel tank bands, and dismount
the fuel tank from vehicle.
WARNING:
A helper is required to perform this work.
B: INSTALLATION
1) Support the fuel tank with transmission jack, set
the fuel tank, and then temporarily tighten the bolts
of fuel tank band.
WARNING:
A helper is required to perform this work.
FU-01137
FU-01137