Subaru Legacy 2004 Service Manual page 130

Tightening torque:
T-type
!
49.0 N m (5.0 kgf-m, 36.2 ft-lb)
VA1-type
!
34 N m (3.5 kgf-m, 25.3 ft-lb)
VA2-type
!
29 N m (3.0 kgf-m, 21.4 ft-lb)
4) Pour oil to the bottom end of filler plug hole.
Recommended gear oil:
Refer to "RM" section. <Ref. to RM-3, LUBRI-
CANTS, RECOMMENDED MATERIALS, Rec-
ommended Materials.>
• Except for VA2-type
(A)
(B)
(A) Filler plug
(B) Drain plug
• VA2-type
(B)
(A) Filler plug
(B) Drain plug
Oil capacity:
0.8 2 (0.8 US qt, 0.7 Imp qt)
NOTE:
Each oil manufacturer has its base oil and addi-
tives. Thus, do not mix two or more brands.
5) Install the filler plug.
NOTE:
• Apply liquid gasket to the filer plug threads for T-
type.
• Use a new aluminum gasket for VA-type.
Front and Rear Differential Gear Oil
PM-00037
(A)
DI-00355
PERIODIC MAINTENANCE SERVICES
Liquid gasket:
THREE BOND 1105 (Part No. 004403010)
Tightening torque:
T-type
!
49.0 N m (5.0 kgf-m, 36.2 ft-lb)
VA1-type
!
34 N m (3.5 kgf-m, 25.3 ft-lb)
VA2-type
!
29 N m (3.0 kgf-m, 21.4 ft-lb)
PM-29