Subaru Legacy 2004 Service Manual page 275

2) Install the automatic belt tension adjuster as-
sembly.
Tightening torque:
!
39 N m (4.0 kgf-m, 28.9 ft-lb)
3) Install the belt idler (No. 1).
Tightening torque:
!
39 N m (4.0 kgf-m, 28.9 ft-lb)
2. TIMING BELT
1) Prepare for installation of automatic belt tension
adjuster assembly. <Ref. to ME(H4SO 2.0)-44, AU-
TOMATIC BELT TENSION ADJUSTER ASSEM-
BLY AND BELT IDLER, INSTALLATION, Timing
Belt.>
2) Installation of timing belt:
(1) Turn the cam sprocket No. 2 using ST1, and
turn the cam sprocket No. 1 using ST2 so that
their alignment marks (A) come to top positions.
ST1 18231AA010 CAM SPROCKET WRENCH
NOTE:
CAM SPROCKET WRENCH (499207100) can
also be used.
Timing Belt
ST2
(2) While aligning the alignment mark (B) on
timing belt with the mark (A) on sprockets, posi-
tion the timing belt properly.
ME-00241
3) Install the belt idler No. 2.
Tightening torque:
39 N
ME-00242
4) Install the belt idler (No. 2).
Tightening torque:
39 N
ME(H4SO 2.0)-45
499207400 CAM SPROCKET WRENCH
(A)
!
m (4.0 kgf-m, 28.9 ft-lb)
!
m (4.0 kgf-m, 28.9 ft-lb)
MECHANICAL
ME-00243
ME-00244
ME-00235