Subaru Legacy 2004 Service Manual page 677

22) Remove the bolt which installs the fuel pipes on
intake manifold.
23) Remove the fuel pipe assembly and pressure
regulator, from intake manifold.
24) Remove the intake manifold. (EC, EK and K4
model)
D: ASSEMBLY
1) Install the intake manifold. (EC, EK and K4 mod-
el)
NOTE:
• Use a new gasket.
• When assembling the nipple, apply liquid gasket.
Liquid gasket:
THREE BOND 1105 (Part No. 004403010)
Tightening torque:
!
8.75 N m (0.89 kgf-m, 6.5 ft-lb)
Intake Manifold
2) Tighten the bolt which installs the fuel pipes on
intake manifold.
Tightening torque:
6.4 N
FU-01337
3) Tighten the bolt which installs pressure regulator
on intake manifold.
Tightening torque:
19 N
4) Connect the fuel injector pipe.
5) Connect the fuel injector pipe LH to fuel hose,
and tighten the clamp screw.
FU-01104
6) Connect the fuel injector pipe RH to fuel hose,
and tighten the clamp screw.
7) Install the fuel injectors.
FU-01104
FU(H4SO 2.5)-17
FUEL INJECTION (FUEL SYSTEMS)
!
m (0.65 kgf-m, 4.7 ft-lb)
!
m (1.9 kgf-m, 13.7 ft-lb)
FU-01337
FU-01102
FU-01101