Subaru Legacy 2004 Service Manual page 674

FUEL INJECTION (FUEL SYSTEMS)
3) Install the EGR pipe to intake manifold. (EC, EK
and K4 model)
Tightening torque:
!
34 N m (3.4 kgf-m, 24.6 ft-lb)
4) Connect the connector to camshaft position sen-
sor.
5) Connect the connector to power steering pump
switch (A).
6) Connect the connector to oil pressure switch (B).
(A)
7) Connect the connector to crankshaft position
sensor.
Intake Manifold
FU-00148
FU-01335
(B)
FU-01087
FU-00056
FU(H4SO 2.5)-14
8) Connect the knock sensor connector.
9) Connect the connectors to engine coolant tem-
perature sensor.
10) Connect the PCV hose (A) to intake manifold.
11) Connect the brake booster hose (B).
12) Connect the engine harness connectors (C) to
bulkhead harness connectors.
(B)
(C)
13) Connect the engine coolant hoses (A) to throt-
tle body.
(A)
14) Connect the spark plug cords to spark plugs.
FU-01334
FU-00055
(A)
FU-01086
(A)
FU-01085