V-Belt - Subaru Legacy 2004 Service Manual

6. V-belt

A: INSPECTION
1. EXCEPT FOR 3.0 L MODEL
1) Replace the belts if crack, fraying or wear is
found.
2) Check the V-belt tension and adjust it if neces-
sary by changing the generator installing position
or idler pulley installing position. <Ref. to PM-12,
REPLACEMENT, V-belt.>
Belt tension (without belt tension gauge):
(A)
When installing new one: 7 — 9 mm (0.276
— 0.354 in)
At inspection: 9 — 11 mm (0.354 — 0.433
in)
(B)
When installing new one: 7.5 — 8.5 mm
(0.295 — 0.335 in)
At inspection: 9.0 — 10.0 mm (0.354 —
0.394 in)
GEN
P/S
(A) Front side belt
(B) Rear side belt
C/P Crank pulley
GEN Generator
P/S Power steering oil pump pulley
A/C A/C compressor pulley
I/P Idler pulley
98 N (10kg)
A/C
(A) (B)
I/P
C/P
PM-00002
V-belt
PERIODIC MAINTENANCE SERVICES
Belt tension (with belt tension gauge):
(A)
When installing new one: 640 — 785 N
(65.3 — 80.0 kgf, 144 — 176 lb)
At inspection: 490 — 640 N (50 — 65 kgf,
110 — 144 lb)
(B)
When installing new one: 620 — 760 N (63
— 77 kgf, 140 — 170 lb)
At inspection: 350 — 450 N (36 — 46 kgf, 79
— 101 lb)
(A)
P/S
(A) Front side belt
(B) Rear side belt
C/P Crank pulley
GEN Generator
P/S Power steering oil pump pulley
A/C A/C compressor pulley
I/P Idler pulley
PM-11
A/C
GEN
I/P
C/P
PM-00154
(B)