Subaru Legacy 2004 Service Manual page 122

3) Start the engine, and then check it does not
overheat or it is cooled excessively. If it overheats
or it is cooled excessively, check the cooling sys-
tem.
• 2.0 L non-turbo and 2.5 L model
<Ref. to CO(H4SO 2.0)-15, Water Pump.> <Ref. to
CO(H4SO 2.0)-18,
CO(H4SO 2.0)-20, Radiator.> <Ref. to CO(H4SO
2.0)-24, Radiator Cap.>
• Turbo model
<Ref. to CO(H4DOTC)-15, Water Pump.> <Ref. to
CO(H4DOTC)-17, Thermostat.>
CO(H4DOTC)-19,
CO(H4DOTC)-23, Radiator Cap.>
• 3.0 L model
<Ref. to CO(H6DO)-11, Water Pump.> <Ref. to
CO(H6DO)-12, Thermostat.> <Ref. to CO(H6DO)-
13, Radiator.> <Ref. to CO(H6DO)-16, Radiator
Cap.>
4) Check the radiator fan operates using Subaru
Select Monitor, when the coolant temperature ex-
ceeds 95#C (203#F). If it does not operate, check
the radiator fan system.
• 2.0 L non-turbo and 2.5 L model
<Ref. to CO(H4SO 2.0)-8, INSPECTION, Radiator
Fan System.>
• Turbo model
<Ref. to CO(H4DOTC)-9, INSPECTION, Radiator
Fan System.>
• 3.0 L model
<Ref. to CO(H6DO)-7, INSPECTION, Radiator Fan
System.>
Cooling System
Thermostat.> <Ref.
<Ref.
Radiator.> <Ref.
PERIODIC MAINTENANCE SERVICES
to
to
to
PM-21