CAMSHAFT POSITION SENSOR
FUEL INJECTION (FUEL SYSTEMS)
6. Camshaft Position Sensor
A: REMOVAL
1) Disconnect the battery ground cable.
2) Disconnect the connector from the camshaft po-
sition sensor.
3) Remove the bolt which installs camshaft position
sensor to the camshaft position sensor support.
4) Remove the bolt which installs camshaft position
sensor support to the camshaft cap LH.
5) Remove the camshaft position sensor and cam-
shaft position sensor support as a unit.
6) Remove the camshaft position sensor itself.
8
B2M2322
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Camshaft position sensor support;
Camshaft position sensor;
6.4 N.m (0.65 kgf-m, 4.7 ff-lb)
6.4 N-m (0.65 kgf-m, 4.7 ft-lb)
\ '
02M2321
I
FU(S0HC)-29