Subaru Legacy 2004 Service Manual page 393

• RHD model
(1) Accelerator pedal ASSY
(2) Stopper
C: CAUTION
• Wear work clothing, including a cap, protective
goggles and protective shoes during operation.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust and dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Be careful not to burn yourself, because each
part on the vehicle is hot after running.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before disconnecting electrical connectors of
sensors or units, be sure to disconnect the ground
cable from battery.
General Description
T
(1)
T
(2)
SP(H4SO 2.0)-3
SPEED CONTROL SYSTEMS
!
Tightening torque: N m (kgf-m, ft-lb)
T: 18 (1.8, 13.0)
SP-02003