Subaru Legacy 2004 Service Manual page 199

FUEL INJECTION (FUEL SYSTEMS)
CAUTION:
Always use a new retainer.
( A )
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel line.
CAUTION:
• Always use a new retainer.
• Make sure that the connected portion is not
damaged or has dust. If necessary, clean the
seal surface of pipe.
(A) Seal surface
(B) Pipe
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into the connector completely.
( A )
(A) Connector
(B) Retainer
(C) Pipe
Fuel Delivery, Return and Evaporation Lines
( B )
( C )
FU-00124
( A )
( B )
FU-00125
( B )
( C )
FU-00126
FU(H4SO 2.0)-54
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Ensure the two retainer pawls are engaged in
their mating positions in the connector.
• Be sure to inspect the hoses and their con-
nections for fuel leakage.
( A )
(A) Connector
(B) Retainer
(C) Pipe
2) Connect the fuel delivery hose to the pipe with
an overlap of 20 to 25 mm (0.79 to 0.98 in).
Type A: When the amount of inserting is specified.
Type B: When the amount of inserting is not speci-
fied.
#
2: 2.5 1.5 mm (0.098
#
L: 22.5 2.5 mm (0.886
( 1 )
Type A
Type B
(1) Pipe
(2) Clamp
(3) Hose
3) Connect the return hose and evaporation hose
to pipe by approx. 15 mm (0.59 in) from the hose
end.
Fuel return hose:
#
L = 22.5 2.5 mm (0.885
Fuel evaporation hose:
#
L = 17.5 2.5 mm (0.689
( B )
( C )
FU-00127
#
0.059 in)
#
0.098 in)
( 2 ) ( 3 )
L
FU-00128
#
0.098 in)
#
0.098 in)