Subaru Legacy 2004 Service Manual page 676

FUEL INJECTION (FUEL SYSTEMS)
12) Remove the purge control solenoid valve.
<Ref. to EC(H4SO 2.0)-7, REMOVAL, Purge Con-
trol Solenoid Valve.>
13) Remove the harness band clips which install
the engine harness.
14) Remove the bolts which hold the engine har-
ness to intake manifold.
15) Remove the engine harness from intake mani-
fold.
16) Remove the bolts which install injector pipe on
the intake manifold as shown in the figure.
• RH side
Intake Manifold
• LH side
FU-01096
17) Remove the fuel injectors from injector pipe.
18) Loosen the clamp which holds fuel injector pipe
RH to fuel hose, and then disconnect the pipe from
fuel hose.
FU-01097
19) Loosen the clamp which holds fuel injector pipe
LH to fuel hose, and then disconnect the pipe from
fuel hose.
FU-01098
20) Remove the fuel injector pipe.
21) Remove the bolt which installs pressure regu-
lator on intake manifold.
FU(H4SO 2.5)-16
FU-01099
FU-01100
FU-01101
FU-01102