Subaru Legacy 2004 Service Manual page 302

MECHANICAL
(1)
(1) Piston
(2) Piston pin
(3) Snap ring
(4) Gasket
(7) Place the cylinder block to face the #3 and
#4 cylinder side upward. Following the same
procedures as used for #1 and #2 cylinders, in-
stall the pistons and piston pins.
20) Install the water pipe.
21) Install the baffle plate.
Tightening torque:
!
6.4 N m (0.65 kgf-m, 4.7 ft-lb)
22) Install the oil strainer and O-ring.
Tightening torque:
!
10 N m (1.0 kgf-m, 7.2 ft-lb)
23) Install the oil strainer stay.
Cylinder Block
T2
(5)
(3)
(4)
(2)
(5) Service hole plug
(6) Service hole cover
(7) O-ring
ME-00300
ME(H4SO 2.0)-72
T1
(6)
(7)
(3)
(2)
Tightening torque: N
T1: 6.4 (0.65, 4.7)
T2: 70 (7.1, 50.6)
24) Apply liquid gasket to mating surfaces and in-
stall the oil pan.
Liquid gasket:
THREE BOND 1207C (Part No. 004403012) or
equivalent
(1)
ME-00161
!
m (kgf-m, ft-lb)
ME-00162