Subaru Legacy 2004 Service Manual page 673

15) Disconnect the connector from camshaft posi-
tion sensor.
16) Remove the EGR pipe from intake manifold.
(EC, EK and K4 model)
17) Disconnect the fuel hoses from fuel pipes.
WARNING:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
(C)
(A) Fuel delivery hose
(B) Return hose
(C) Evaporation hose
Intake Manifold
FU-01335
FU-00148
(A)
(B)
FU-01088
FU(H4SO 2.5)-13
FUEL INJECTION (FUEL SYSTEMS)
18) Remove the bolts which secure intake manifold
to cylinder head.
19) Remove the intake manifold.
B: INSTALLATION
1) Install the intake manifold onto cylinder heads.
NOTE:
Use a new gasket.
Tightening torque:
!
25 N m (2.5 kgf-m, 18.1 ft-lb)
2) Connect the fuel hoses.
NOTE:
If fuel hoses or clamps are damaged, replace them
with new ones.
(C)
(A) Fuel delivery hose
(B) Return hose
(C) Evaporation hose
Tightening torque (Hose clamp screw):
!
1.25 N m (0.13 kgf-m, 0.94 ft-lb)
FU-01089
FU-01089
(A)
(B)
FU-01088