Subaru Legacy 2004 Service Manual page 692

FUEL INJECTION (FUEL SYSTEMS)
7) Remove the harness band (B) which holds en-
gine harness to injector pipe.
(B)
(A)
8) Remove the bolts which hold fuel injector pipe
onto intake manifold.
9) Remove the fuel injector while lifting up the fuel
injector pipe.
Fuel Injector
B: INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
NOTE:
• Use new O-rings.
• O-ring (B) is used for EC, EK and K4 model.
(A)
FU-01338
Tightening torque:
FU-01099
19 N
FU-01100
Tightening torque:
19 N
FU-01110
FU(H4SO 2.5)-32
(A) O-ring
(B) O-ring
(C) Fuel injector
(D) O-ring
!
m (1.9 kgf-m, 13.7 ft-lb)
!
m (1.9 kgf-m, 13.7 ft-lb)
(A)
(B)
(C)
(D)
FU-02157
FU-01098
FU-01094