Subaru Legacy 2004 Service Manual page 462

ENGINE (DIAGNOSTICS)
Remarks
AT coordinate permission sig-
nal
Clutch switch signal
Stop light switch signal
SET/COAST switch signal
RES/ACC switch signal
Brake switch signal
Main switch signal
Cancel switch signal
Electronic throttle control
motor relay signal
Data reception signal
Counter update signal
NOTE:
For detailed operation procedure, refer to "SUBARU SELECT MONITOR OPERATION MANUAL".
Subaru Select Monitor
Display
Torque Control Permission
Clutch Switch
Stop Light Switch
SET/COAST Switch
RESUME/ACCEL Switch
Brake Switch
Main Switch
Cancel Switch
ETC Motor Relay
Body Int. Unit Data
Body Int. Unit Count
EN(H4SO 2.0)(diag)-30
Message
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
LED "ON" requirements
When AT coordinate permis-
sion signal is input.
When clutch switch is turned
to ON.
When stop switch is turned to
ON.
When SET/COAST switch is
turned to ON.
When RES/ACC switch is
turned to ON.
When brake switch is turned to
ON.
When main switch is turned to
ON.
When cancel switch is turned
to ON.
When electronic throttle con-
trol motor relay is in function.
When data reception signal is
entered.
When counter update signal is
entered.