Air Cleaner Case - Subaru Legacy 2004 Service Manual

INTAKE (INDUCTION)

3. Air Cleaner Case

A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the air intake duct. <Ref. to IN(H4SO
2.0)-9, REMOVAL, Air Intake Duct.>
3) Disconnect the connector from mass air flow and
intake air temperature sensor. (2.5 L EC, EK, K4
model)
4) Loosen the clamp (A) which connects the air
cleaner case to intake duct.
5) Remove the clip (B) from upper side of air clean-
er case.
(B)
Air Cleaner Case
IN-00203
IN-00204
(A)
IN-00205
IN(H4SO 2.0)-6
6) Remove the air cleaner case (rear) and air
cleaner element.
7) Remove the bolt (A) and nut (B) which hold the
air cleaner case on body.
(B)
8) Remove the air cleaner case (front).
IN-00206
(A)
IN-00208