Subaru Legacy 2004 Service Manual page 701

23.Fuel Tank
A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
1) Set the vehicle on a lift.
2) Release the fuel pressure.
<Ref. to FU(H4SO 2.5)-40, RELEASING OF FUEL
PRESSURE, PROCEDURE, Fuel.>
3) Drain fuel from the fuel tank.
<Ref. to FU(H4SO 2.5)-40, DRAINING FUEL,
PROCEDURE, Fuel.>
4) Remove the rear seat.
5) Remove the service hole cover from fuel pump.
(1) Remove the bolts (A).
(2) Push the grommet (B) down under the body
and remove service hole cover.
(A)
(B)
6) Disconnect the connector from fuel pump.
7) Remove the service hole cover from fuel sub lev-
el sensor.
(1) Remove the bolts (A).
Fuel Tank
8) Disconnect the connector (A) from fuel sub level
sensor.
9) Disconnect the quick connector from the fuel de-
livery (B) and return hose (C). <Ref. to FU(H4SO
2.5)-55, REMOVAL, Fuel Delivery, Return and
Evaporation Lines.>
(A)
FU-01124
10) Remove the rear wheels.
11) Remove the bolts which secure the rear brake
hose installation bracket.
FU-01125
FU(H4SO 2.5)-41
FUEL INJECTION (FUEL SYSTEMS)
(2) Push the grommet (B) down under the body
and remove service hole cover.
(A)
(A)
(A)
(B)
FU-01126
(C)
(B)
FU-01127
FU-01128