Camshaft Position Sensor - Subaru IMPREZA GD 2007 Series Manual

asieps_tobira_IM_US.book 32 ページ ２０１２年１月１７日 火曜日 午後３時４８分
FUEL INJECTION (FUEL SYSTEMS)

6. Camshaft Position Sensor

A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Disconnect the connector from camshaft posi-
tion sensor RH.
3) Remove the camshaft position sensor RH from
the cylinder head rear.
4) Remove the cam shaft position sensor LH in the
same way as RH.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
Camshaft Position Sensor
FU-00009
FU-01054
FU-01054
FU(H4DOTC)-32