Memory Management - YASKAWA VIPA System MICRO M13-CCF0000 Manual

VIPA System MICRO
3.2.3.2 LEDs I/O periphery
Digital input
DI +0.0 DI +0.7
DI +1.0 ... DI +1.7
Digital output
DO +0.0 ... DO +0.7
DO +1.0 ... DO +1.3
Power supply
1L+
3L+
4L+
4M

3.2.4 Memory management

General
HB400 | CPU | M13-CCF0000 | en | 16-47
LED
green
green
LED
green
green
LED
green
green
green
red
The CPU has an integrated memory. Information about the capacity of the memory may
be found at the front of the CPU. The memory is divided into the following parts:
Load memory 128kbyte
n
n Code memory (50% of the work memory)
n Data memory (50% of the work memory)
n Work memory 64kbyte
– There is the possibility to extend the work memory to its maximum capacity
128kbyte by means of a VSC.
Description
Digital I+0.0 ... 0.7 has "1" signal
Digital I+0.0 ... 0.7 has "0" signal
Digital input I+1.0 ... 1.7 has "1" signal
Digital input I+1.0 ... 1.7 has "0" signal
Description
Digital output Q+0.0 ... 0.7 has "1" signal
Digital output Q+0.0 ... 0.7 has "0" signal
Digital output Q+1.0 ... 1.3 has "1" signal
Digital output Q+1.0 ... 1.3 has "0" signal
Description
DC 24V electronic section supply
DC 24V electronic section supply not available
DC 24V power section supply inputs OK
DC 24V power section supply inputs not available
DC 24V power section supply outputs OK
DC 24V power section supply outputs not available
Error, overload respectively short circuit on the outputs
no error
Hardware description
Structure > Memory management
41