Memory Management; Internal Memory - YASKAWA iC9200 Series Operating Manual

Hide thumbs Also See for iC9200 Series:
Table of Contents

Advertisement

iC9200 Series
4.6

Memory management

4.6.1

Internal memory

Overview
Working memory
Parametrization memory
HB700 | CPU | PMC921xEx | en | 24-04
5.
Click on [Apply and Reboot].
�� The settings are accepted, transferred to the CPU and the CPU is automatically
restarted for activation.
The CPU can now only be reached via the new IP address
parameters. Please note that these new data are currently not
automatically transferred in the settings of iCube Engineer. You
have to manually adjust these in the settings there.
Please note that, depending on the firmware and the components used,
not the entire memory area is available.
Memory
PMC9212Ex only:
2GB working memory (RAM).
12MB program memory.
32MB data memory.
512kB retentive data memory.
PMC9216Ex only:
2GB working memory (RAM).
12MB program memory.
32MB data memory.
3072kB retentive data memory.
During operation, the operating system stores temporary data and parts of the user
program in the working memory.
With MRESET you can set the CPU to the Ready state without a power cycle. This
unloads the working memory, among others.
The parametrization memory as the sum of program and data memory provides memory
for:
Current firmware version
Overlay file system for user program, configurations, user data and firmware adjust-
ments.
Use of the overlay file system:
As soon as you configure the CPU or make changes to the current firmware version,
data are generated in the overlay file system.
By 'Resetting to the factory setting type 1', you can delete the overlay file system,
among others. The current firmware version remains, but all changes to it are dis-
carded.
⮫ 'Reset to factory settings type 1'...page 97
By 'Resetting to the factory setting type 2', you can delete the overlay file system
and the current firmware version, among others. The current firmware version is over-
written by the original firmware version and the delivery state of the CPU is restored.
⮫ 'Reset to factory settings type 2'...page 98
Deployment CPU iC921xM-EC
Memory management > Internal memory
⮫ 'MRESET'...page 97
93

Advertisement

Table of Contents
loading

Table of Contents