Configuration With Tia Portal; Tia Portal - Work Environment; General; Work Environment Of The Tia Portal - YASKAWA VIPA System MICRO M13-CCF0000 Manual

VIPA System MICRO
10

Configuration with TIA Portal

10.1

TIA Portal - Work environment

10.1.1

General

General
Starting the TIA Portal
Exiting the TIA Portal
10.1.2

Work environment of the TIA Portal

Portal view
Project view
HB400 | CPU | M13-CCF0000 | en | 16-47
In this chapter the project engineering of the VIPA CPU in the Siemens TIA Portal is
shown. Here only the basic usage of the Siemens TIA Portal together with a VIPA CPU is
shown. Please note that software changes can not always be considered and it may thus
be deviations to the description. TIA means Totally integrated Automation from Siemens.
Here your VIPA PLCs may be configured and linked. For diagnostics online tools are
available.
Information about the Siemens TIA Portal can be found in the online help
respectively in the according online documentation.
To start the Siemens TIA Portal with Windows select 'Start è Programs
è Siemens Automation è TIA ...'
Then the TIA Portal opens with the last settings used.
With the menu 'Project è Exit' in the 'Project view' you may exit the TIA Portal. Here
there is the possibility to save changes of your project before.
Basically, the TIA Portal has the following 2 views. With the button on the left below you
can switch between these views:
The 'Portal view' provides a "task oriented" view of the tools for processing your project.
Here you have direct access to the tools for a task. If necessary, a change to the Project
view takes place automatically for the selected task.
The 'Project view' is a "structured" view to all constituent parts of your project.
TIA Portal - Work environment > Work environment of the TIA Portal
Configuration with TIA Portal
201