Profinet - Optional - YASKAWA iC9200 Series Operating Manual

Web-based management - WBM
Diagnostics > PROFINET - optional
6.3.5

PROFINET - optional

Tab: 'Overview'
180
■
Severity
–
Here you can limit the message entries based on their severity.
–
The limitation is based on the following graduation for the minimum severity:
Internal à Information à Warning à Error à Critical Error à Fatal Error
For example with Internal, all degrees of severity are listed. With the setting Error,
all Error, Critical Error and Fatal Error are listed.
■
Sender
–
Here you can limit the message entries by entering or selecting a sender in the
selection field.
–
The currently list of message entries is always decisive for the names in the
selection field.
–
When entering a name or part of the name, click on [Apply Filter] to list messages
from senders that match or partially match the name you are looking for.
■
Maximum number of notifications
–
Here you can limit the number of message entries to be listed.
–
1024 is set by default, a maximum of 4000 is allowed.
■
Time from, Time to
–
Here you can limit the period of the message entries by entering the date and time.
–
Time from: Lists all message entries that are not older than the specified time.
–
Time to: Lists all message entries that are older than the specified time.
–
When filtering by time specification, a date must always be entered and a time can
be added.
Here you will find information on the current PROFINET function of the controller and its
IP settings.
Please note that a separate licence is required for the use of PROFINET,
which must be activated accordingly!
Diagnostics
iC92...
PMC92...
Profinet
Overview
Information
Diagnostics
Axis Grid
EtherCAT
Motion Alarms
Notifications
Profinet
SliceBus
SliceBus Modules
Configuration
Security
Administration
...
HB700 | CPU | PMC921xEx | en | 24-04
iC9200 Series