Pulse Width Modulation - Pwm; Properties - YASKAWA VIPA System MICRO M13-CCF0000 Manual

VIPA System MICRO
Power supply
1L+
3L+
4L+
4M

5.8 Pulse width modulation - PWM

5.8.1 Properties

HB400 | CPU | M13-CCF0000 | en | 16-47
LED
green
green
green
red
n By presetting of time parameters, the CPU evaluates a pulse sequence with
according pulse/pause ratio and outputs it via the according output channel.
n Channel 0 and 1 are supported
n Control by the user program via SFB 49
More information about the usage of this block may be found in the
manual "SPEED7 Operation List" from VIPA.
1 Period
2 On-delay
3 Pulse duration
4 Pulse pause
The counting function is disabled during the pulse width modulation on
the same channel.
Pulse width modulation - PWM > Properties
Description
DC 24V electronic section supply
DC 24V electronic section supply not available
DC 24V power section supply inputs OK
DC 24V power section supply inputs not available
DC 24V power section supply outputs OK
DC 24V power section supply outputs not available
Error, overload respectively short circuit on the outputs
no error
Deployment I/O periphery
123