Proceeding; Setting Standard Cpu Parameters; Parameterization Via Siemens Cpu; Parameters Cpu - YASKAWA VIPA System 300S+ Manual
Hide thumbs
Also See for VIPA System 300S+:
Table of Contents
Advertisement
+
VIPA System 300S
5.7.2 Proceeding
5.8 Setting standard CPU parameters
5.8.1 Parameterization via Siemens CPU
Parameterization via Sie-
mens CPU
5.8.2 Parameters CPU
Supported parameters
HB140 | CPU | 314-6CF23 | en | 19-01
The embedding of the CPU 314-6CF23 and its modules at the SPEED-Bus happens by
means of a virtual PROFIBUS master system with the following approach:
1.
Perform a hardware configuration for the CPU.
tion - CPU' page 54
2.
Since the SPEED-Bus modules are to be linked as a virtual PROFIBUS system,
configure always as last module a Siemens DP master CP 342-5 (342-5DA02
V5.0). Link the DP master to a new PROFIBUS net and switch it to DP master oper-
ating mode.
3.
To this master system you assign every SPEED-Bus module as
"VIPA_SPEEDBUS" slave starting with the CPU. Here the PROFIBUS address cor-
responds to the slot no. Beginning with 100 for the CPU. Place at slot 0 of every
slave the assigned module
Due to the fact that some SPEED-Bus CPs from VIPA are similar in
project engineering and parametrization to the corresponding CP from
Siemens, for each SPEED-Bus CP a corresponding Siemens CP is to be
placed and linked at the standard bus.
More information about the configuration of the according SPEED-Bus
module may be found in the according manual.
Since the CPU 314-6CF23 is to be configured as Siemens CPU 317-2DP (6ES7
317-2AK14-0AB0 V3.3) in the Siemens hardware configurator, the standard parameters
of the VIPA CPU may be set with "Object properties" of the CPU 317-2DP during hard-
ware configuration. Via a double-click on the CPU 317-2DP the parameter window of the
CPU may be accessed. Using the registers you get access to every standard parameter
of the CPU.
The CPU does not evaluate each parameter, which may be set at the hardware configu-
ration. The following parameters are supported by the CPU at this time:
Deployment CPU 314-6CF23
Setting standard CPU parameters > Parameters CPU
Ä Chap. 5.4 'Hardware configura-
59
Advertisement
Table of Contents
