General Data Protection Regulation - Siemens SINAMIC S120 Equipment Manual

Introduction

1.7 General Data Protection Regulation

Use of third-party products
This document contains recommendations relating to third-party products. Siemens accepts
the fundamental suitability of these third-party products.
You can use equivalent products from other manufacturers.
Siemens does not accept any warranty for the properties of third-party products.
Ground symbols
Table 1- 1
1.7 General Data Protection Regulation
Compliance with the General Data Protection Regulation
Siemens respects the principles of data protection, in particular the data minimization rules
(privacy by design).
For this product, this means:
The product does not process neither store any person-related data, only technical function
data (e.g. time stamps). If the user links these data with other data (e.g. shift plans) or if he
stores person-related data on the same data medium (e.g. hard disk), thus personalizing
these data, he has to ensure compliance with the applicable data protection stipulations.
12
Symbols
Icon
Air-Cooled Chassis Power Units - supplement to Motor Module 6SL3320-1TG41-5AA3
Meaning
Connection for protective conductor
Ground (e.g. M 24 V)
Connection for function potential bonding
Equipment Manual, 10/2020, A5E50422764A