After Usage - Weinmann SOMNOsmart 2 Description And Instructions For Use

4.6 After usage

24
Operation
EN
2. If you press the button
the heat output level (from 1 to 6) of the humidifier.
If a button is not pressed for 4 seconds, the value dis-
played will be saved.
Please refer to the relevant operating instructions for fur-
ther information about setting the humidifier.
1. Remove the headgear with the mask.
2. Press the on / off switch
If the automatic system is selected, the unit will
switch off automatically after approx. 5 seconds.
The date and the therapy duration is shown briefly
on the display
display.
3. Remove the tube connection and the exhalation
system from mask.
4. Clean the mask and the exhalation system (see "5.
Hygienic preparation" on page 27).
Important!
SOMNOsmart 2 consumes approx. 3,5 watt in stand-
by mode. To save electricity you can remove the pow-
er plug from the socket outlet during the day. The
3
stored values and settings will not be lost.
again, you will change
26
to switch off the unit.
24
. Then only "0" is shown on the
21