Table of Contents
Advertisement
Maintenance chart
© Bostitch
ACTION
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
Clean magazine and feeder
compliance for the products.
mechanism.
GB
Keep contact arm working
properly.
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne
signifient en rien que les produits soient conformes aux normes CE.
Internal cleaning
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments
erfüllen nicht die CE-Richtlinien für Produkte.
Operator troubleshooting
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document
PROBLEM
willen niet zeggen dat de producten voldoen aan de CE-vereisten.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse
for produkterne.
Nailer operates, but no nail
is driven.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille
CE-yhdenmukaisuutta.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
Skipping nails.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non
Intermittent feed.
garantiscono la conformità CE per i relativi prodotti.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke
kravene for CE-merking for produktet.
Nails jam.
Driven nail is bent.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão
em conformidade com a CE para os produtos.
The operation of the contact
arm not smooth.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
Fan is working, light indicator
shows GREEN yet it doesn't
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
drive a nail or operation
unstable.
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego
dokumentu nie stanowią deklaracji zgodności CE prezentowanych produktów.
Fan does not operate when
push lever is pressed.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego
Unable to charge battery.
dokumentu nie stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE
pre dané výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum
nem jelenti a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
16
WHY
Prevent a jam.
Promote operator safety and
efficient Nailer operation.
Keep tool efficiency
CHECK METHOD
Check for a jam.
Check function of the nail feeder.
Ribbon spring weakened or damaged?
Check the correct nails are being used.
Check if the driver blade piston is not
returned to the top position
Check for proper nails.
Check function of nail feeder.
Ribbon spring weakened or damaged?
Nail feeder worn or damaged?
Check for returning of piston.
Check for proper nails.
Driver blade worn?
Nail feeder worn or damaged?
Contact arm bent?
Check contact arm's moving track for debris.
Check for returning of piston.
Check fuel cell, insufficient?
Check spark plug wire, worn out?
Check spark plug, grease or debris?
Check filter, clogged?
Magazine empty.
Note the color of the light indicator.
HOW
Blow clean daily.
Blow clean daily.
Follow mentioned procedure every 20.000 shots
(less in dirty environment)
CORRECTION
Clear the jam.
Clean and lubricate if required.
Replace ribbon spring.
Use only recommended nails.
Remove the battery, fuel cell & nails from the tool and,
using a thin piece of metal of screwdriver 100mm long (not
included), insert into the contact arm and push the bar to the
top position.
Use only recommended nails.
Clean and lubricate.
Replace ribbon spring.
Replace nail feeder.
Pull the trigger firmly and for about 0.5 sec after combustion.
Too low temperature, warm up fuel cell under 50°C (120°F).
Use only recommended nails.
Contact Bostitch for replacement.
Replace nail feeder.
Contact Bostitch for replacement.
Contact Bostitch for replacement.
Push the contact arm all the way.
Too low temperature, warm up fuel cell under 50°C (120°F).
Exchange it with a new fuel cell.
Contact Bostitch for replacement.
Contact Bostitch for replacement.
Clean in accordance with the maintenance chart.
Load more nails in the magazine.
If red: charge the battery.
If green: Contact Bostitch for replacement.
Check the electrical cord.
Advertisement
Table of Contents
