Quit; Reboot - 3Com Baseline 2928 PWR Plus User Manual

round-trip min/avg/max = 1/41/205 ms
The above information shows that IP address 1.1.2.2 is reachable and the echo replies are all returned
from the destination. The minimum, average, and maximum roundtrip intervals are 1 millisecond, 41
milliseconds, and 205 milliseconds respectively.

quit

Syntax
quit
Parameters
None
Description
Use the quit command to log out of the system.
Examples
# Log out of the system.
<Sysname> quit
******************************************************************************
* Copyright (c) 2004-2009 3Com Corp. and its licensors. All rights reserved. *
* This software is protected by copyright law and international treaties.
* Without the prior written permission of 3Com Corporation and its licensors,*
* any reproduction republication, redistribution, decompiling, reverse
* engineering is strictly prohibited. Any unauthorized use of this software
* or any portion of it may result in severe civil and criminal penalties, and*
* will be prosecuted to the maximum extent possible under the applicable law.*
******************************************************************************
User interface aux0 is available.
Please press ENTER.

reboot

Syntax
reboot
Parameters
None
Description
Use the reboot command to reboot the device and run the main configuration file.
Note that:
Use the command with caution because reboot results in service interruption.
3-9
*
*
*