Topology Example: Drives In Vector Control - Siemens SINAMICS S120 Commissioning Manual

Preparation for commissioning
1.5 Rules for wiring with DRIVE-CLiQ
1.5.6

Topology example: Drives in vector control

Example 1
A drive line-up with three Motor Modules in chassis format with identical pulse frequencies or
three Motor Modules in booksize format in vector control mode:
The Motor Modules chassis format with identical pulse frequencies or the Motor Modules
booksize format in vector control mode can be connected to one DRIVE-CLiQ interface on
the Control Unit.
In the following diagram, three Motor Modules are connected to the DRIVE-CLiQ socket
X101.
Note
This topology does not match the topology created offline by STARTER and must be
changed manually.
Figure 1-6
42
Drive line-up (chassis) with identical pulse frequencies
Commissioning Manual, (IH1), 01/2012, 6SL3097-4AF00-0BP2
Commissioning Manual